Stackable Spoon Template
Stackable Spoon Template
Couldn't load pickup availability
As our product is made to order, please allow 10 business days for processing of your order. Shipping will depend on your location (please refer to our FAQs).
Sizing
Our Stackable Spoon Template contains 10 pieces:
- A set of 5 hemi-spheres drape mould (18 mm, 22 mm, 27 mm, 35 mm and 45 mm)
- A set of 5 matching spoon cutters
We have designed our spoon moulds to align with standard tablespoon and teaspoon measurements, however due to the handmade nature of ceramics and the natural variations in shrinkage rates between different clay bodies, we cannot guarantee exact volume consistency. You should embrace the handmade nature of ceramics as a normal part of the artisanal process.
18 mm | 1/4 teaspoon |
22 mm | 1/2 teaspoon |
27 mm | 1 teaspoon |
35 mm | 1/2 tablespoon |
45 mm | 1 tablespoon |
Construction
The Stackable Spoon moulds should be used with a release agent to allow the clay to be easily removed from the plastic drape mould. We recommend laying plastic wrap across your mould before laying your spoon cut out on top.
- Roll clay 0.5 - 1 cm thick and use cutters to cut out spoon shapes. Clean up any rough edges now.
- Place plastic wrap across the top of your spoon drape mould, then lay matching cut out on top, stretching the clay over the hemi-sphere until the edges just touch the ground.
- Allow clay to firm up and remove plastic wrap. Clean up any marks.
These spoons should be able to stack one on top of the other once fired.
Materials
Materials
We make our products out of 3D printed PLA plastic. PLA is typically made from natural thermoplastic polyester that is derived from renewable resources such as corn starch or sugar cane.
Dimensions
Dimensions
Unless specified, measurements are from the widest dimension.
Please refer to our Size Guidelines for further explanation on our product sizing.
Care Instructions
Care Instructions
Please refer to our Care Instructions in the FAQs prior to purchasing.
Share


